LumaNest

Sunrise Alarm Lamps with Sound: Four Bedside Models Compared

Choose a simple, button-controlled wake-up lamp if you mainly want a light ramp and a sound at the end. Choose a radio-equipped model if you want a familiar station instead of an alarm tone, or an app-configured model if you want to change the light and sound pairing for different days. If you only need a light to find your way across the bedroom at night, start with our night-light buying guide instead. These four US models were selected using published manufacturer specifications and instructions; we have not personally tried them. The comparisons are about how each model fits a routine, not which one will wake any particular person more reliably.

At a glance

Model Power Brightness Runtime Sensor/feature Best for
Lumie Bodyclock Glow 150 Wall adapter (manual) Adjustable sunrise intensity (US specifications) Not applicable: wall-powered; 20, 30 or 45-minute sunrise (manual) Daily alarm; 10 optional sleep/wake sounds (US specifications) A consistent schedule and on-device controls
Lumie Bodyclock Shine 300 Wall adapter (manual) Adjustable sunrise intensity (US specifications) Not applicable: wall-powered; 15–90-minute sunrise (US specifications) FM radio; 15 sounds; daily or weekly scheduling (US specifications) On-device scheduling and radio
Hatch Restore 3 Wall outlet (setup instructions) Adjustable sunrise brightness (light guide) Not applicable: wall-powered; adjustable sunrise, exact length range: Not published by the maker (light guide) App-configured light and audio; free alarm options; additional Hatch+ content (light guide) Custom app-based wake routines
Beurer WL 75 Wall adapter (technical data) Adjustable; comparable wake-mode lux: Not published by the maker (technical data) Not applicable: wall-powered; selectable sunrise timing; exact length range: Not published by the maker (instructions) Two adjustable alarms, radio or six wake-up melodies (US specifications) Two alarm times and a radio, with optional app controls for basic use

“Runtime” is not battery endurance here. We include the published length of the sunrise where useful: that is how long the wake-up sequence ramps, not how long the unit would work without an outlet. Brightness settings are also not necessarily comparable between models. These cells describe controls, not an equivalent lab reading at the pillow. We left lux out where a comparable wake-mode measurement was not documented under clear conditions. For a small bedside table, first decide where the lamp would sit, then consider what might block the light between the lamp and your pillow.

Lumie Bodyclock Glow 150: a straightforward daily routine

The North American manual documents setup on the clock. It gives you three sunrise lengths—20, 30 or 45 minutes—and a setting for the ending light level. The US model sheet lists ten sleep and wake sounds, including waves and white noise. It also documents a fade-to-night-light option, useful if you want a low light to remain after the sunset sequence.

Good fit if: You get up at roughly the same time most days and want a natural sound bedside lamp you can set without getting out your phone.

Skip if: You need different times programmed for individual weekdays or want to wake to FM; compare the Shine 300 instead.

Lumie Bodyclock Shine 300: weekday changes and FM radio

The US specifications list daily or weekly alarm scheduling, a 15–90-minute sunrise range, 15 sounds, and FM radio. The North American manual describes setting a separate time for each day in weekly mode and choosing radio or a built-in sound for the audio alarm. That is a meaningful upgrade over a fixed daily time if your wake-up schedule changes midweek. Confirm that your preferred station comes in clearly at the intended spot.

Good fit if: You want radio or separate weekday and weekend times, with setup on the clock itself.

Skip if: Your schedule rarely changes and you’re unlikely to use FM. The extra controls don’t solve a problem you have.

Hatch Restore 3: more control over light and sound in an app

Hatch’s light guide describes setting the end brightness, sound volume, sunrise duration and repeat days in the Hatch Sleep app. You can turn off either light or audio for an alarm. Some choices are included; Hatch+ adds more content. The setup instructions require Wi-Fi for setup and specify that the unit stays plugged in. This suits someone who likes to set the routine on a phone and then leave it alone at bedtime.

Good fit if: You want to try different light-and-sound combinations across the week and are comfortable with app-based setup.

Skip if: You want to configure alarms from the clock without a phone, or don’t have reliable Wi-Fi where you’ll set it up.

Beurer WL 75: two alarm times with radio or melodies

Beurer’s US model sheet lists two adjustable alarm times and a choice of radio or six wake-up melodies. The manufacturer’s technical notes describe button-based brightness adjustment and app controls for a wider range of settings, including changing sunrise timing. Two alarm times are useful for switching between schedules, but that doesn’t mean the device sends independent light or sound to different sides of a shared bed.

Good fit if: You want an FM alarm and two adjustable times, and you’re comfortable using the LightUp app for additional settings.

Skip if: You want every control to be available from the device alone, or you’re shopping specifically for a built-in library of nature sounds rather than radio and melodies.

How we chose

We checked that the makers listed the exact models for US sale and that official product pages or manuals documented both gradual light and wake audio. Our shortlist is organized by routine, not by score. A longer sunrise range is useful if you care when the room starts brightening; it is not automatically better. More sounds are useful only if they include something you want to hear. We treated a dimmable clock face and a dimmable lamp as separate controls. We did not use customer ratings or extrapolate missing specifications from a related model.

Start by deciding what matters most to you: a wake sound you recognize, an alarm schedule you can keep straight, or an easy way to change the sunrise. Next, check where the light and speaker will be relative to both sleepers, and keep your usual alarm as a backup for the first few mornings. If you’ll also switch on the light while someone is asleep, read our button versus dimmer night-light comparison for a separate look at nighttime controls. For imported or region-specific versions, use the night-light plug compatibility guide to check the label and manual before assuming they match the US model.

FAQ

What’s the difference between a sunrise alarm lamp and a night light?

A sunrise alarm runs a timed light sequence around wake-up; a night light is there for visibility when the room is otherwise dark. Start with the night-light buying guide if getting around after dark is the main problem. Check whether the alarm lamp has a separate low-light mode if you want one device to do both jobs.

Is a natural sound bedside lamp different from a sound machine?

Check what audio can be assigned to the actual alarm instead of assuming every bedtime sound is also a wake sound. For instance, the Shine 300 manual distinguishes setting morning audio from setting audio during a fading sunset. Look in the alarm section of the manual, not just the sound list.

Can I wake up with light alone?

Some models offer it. On Restore 3, you can switch alarm audio off in the app, according to the light guide. If waking at a particular time is important, use a separate backup while you learn whether the light-only setting works for you.

Does clock memory keep the alarm running in an outage?

No assumption is safe here. The Glow 150 manual describes retaining the time for 30 minutes without power, not running a full light-and-sound alarm on battery. For outage coverage, look for explicit documentation of what stays on or keep a separate battery-powered alarm.

How early should the sunrise start?

Think about the time you want the first light to appear, not only the time the sound should go off. Start conservatively if you share the room. With an adjustable lamp, keep the alarm time fixed and change only the ramp length at first; that makes it easier to notice whether the light begins sooner than you want.